Broady Flow Control
Any enquiry about Broady products email to: info_broady@hablem.com
|
Broady Flow Control Products
|
|
For more information on Broady's products, you can click link below and fill in the form or you can call 603-4106 6048/6049/6050 (Engineering Deparment) for any enquiry. We will reach you later soon. Thank You.
 
Request for Broady's Product Catalogue click here!
|
|
|
|
|
|
|
|
Reducing valves are installed where it is required to reduce from one level of pressure to another, whilst providing the required fluid flow to satisfy a downstream demand, irrespective of fluctuations in the inlet pressure or flow demand. The valves manufactured by Broady fall into two
categories, direct acting and pilot operated.
The Reducing Valves - Type B2
(*click picture to enlarge )
|
- Pilot Operated Valve.
- High Capacity with attendant high accuracy.
- Suitable for Steam and Gases.
- Inlet Pressure up to 68 Barg (1000 Psig).
- Reduced Pressure from 0.07 Barg to 17.0 Barg (1 Psig to 250 Psig).
- Maximum temperature is 400ºC (Cast Steel).
- Valve available from ½" to 6" NB.
- New design available for Wet Steam Service.
|
The Reducing Valves - Type C3L.
(*click picture to enlarge )
|
- Direct Acting
- Balanced inlet for accuracy
- Liquid and Gas Duties
- Very Low Reduced Pressure, minimum 0.0015 Barg
- Ideally suited for Gas Blanketing
- Sizes ½" to 3" Screwed or Flanged
|
|
|
|
|
|
|
Relief/Safety Relief Valves
|
|
Relief/safety relief valves are installed to automatically prevent a safe pressure being exceeded in fired or unfired pressure vessels or pipeline systems.
The Safety Relief Valves - Type 180.
(*click picture to enlarge )
|
- Pilot Operated Valve.
- High Capacity with attendant high accuracy.
- Suitable for Steam and Gases.
- Inlet Pressure up to 68 Barg (1000 Psig).
- Reduced Pressure from 0.07 Barg to 17.0 Barg (1 Psig to 250 Psig).
- Maximum temperature is 400ºC (Cast Steel).
- Valve available from ½" to 6" NB.
- New design available for Wet Steam Service.
|
The Safety Relief Valves - Type 2600
(*click picture to enlarge )
|
- Total Lift
- Gas, Liquid and Vapour applications
- Available in Cast Steel and Stainless Steel as standard
- Other materials on request e.g. Bronze, Monel, Titanium etc
- Maximum set Pressure 140 Barg (2000 Psig)
- Minimum set Pressure 0.7 Barg (10 Psi)
- Sizes ½" x 3", ¾" x 1" and 1" x 1" Flanged and Screwed
|
|
|
|
|
|
|
Relief/Safety Relief Valves
|
|
Sometimes called surplus valves, sustaining valves are designed to control the upstream pressure and to surplus away liquids or gases so as to recycle rather than waste, as in the case of relief valves.
The Sustaining Valves - Type 8.
(*click picture to enlarge )
|
- Direct Acting
- Gas, Liquid and Steam applications
- Available in variety of materials
- Maximum set Pressure 8 Barg (120 Psig)
- Minimum set Pressure 0.7 Barg (10 Psi)
- Low Pressure alternative available
- Sizes ½" x 6" inclusive
|
The Sustaining Valves - Type 9.
(*click picture to enlarge )
|
- Direct Acting
- Balances Design for varying Back Pressure
- Gas, Liquid and Steam applications
- Available in a variety of materials
- Maximum set Pressure 8 Barg (120 Psig)
- Minimum set Pressure 0.7 Barg (10 Psi)
- Sizes ½" x 8" inclusiv
|
|
|
|
|
|
See other products:| Bell | Bronswerk | Carltsoe | Eesiflo | Fluidwell | Hydrotechnik | PCM | Ramco | Rivertrace | Sealite | Welker |
|
