Hydrotechnik
Any enquiry about Hydrotechnik products email to: info_ht@hablem.com
|
Hydrotechnik Flow Turbines
|
|
RE3 & RE4 FLOW TURBINES are the right choice for durable, precise flow measurement of most hydraulic fluids.
They can be custom ordered for your specific needs. Accuracy is ±2.5% of actual value or ± 0.5% iflinearised with Multisystem 5000 or panel displays with RS232 communication ports,RE4's are available in four sizes up to 600 I/min and come as standard with MINIMESS® test point and P/T couplings for pressure and temperature reading. Bodies are aluminum (stainless steel is also available) as are the internal flow straighteners. Precision bearings are stainless steel. |
(*click picture to enlarge)
|
Range / Type |
In/Out |
Max Working Pressure
|
Length
|
Part number
|
1 to 10 l/min
|
RE4-10
|
1/4" BSP
|
400 bar
|
120mm
|
3107-10-35.00
|
7.5 to 75 l/min - (2 - 75 L/min when linearised)
|
RE4-75
|
3/4" BSP
|
400 bar
|
129mm
|
3107-70-35.00
|
15/300 l/min - (9 - 300 L/min when linearised)
|
RE4-300
|
1" BSP
|
400 bar
|
149mm
|
3107-71-35.00
|
|
25 to 600 l/min - (16 - 600 L/min when linearised)
|
RE4-600
|
11/4" BSP
|
350 bar
|
173mm
|
3107-72-35.00
|
|
|
|
|
|
|
|
|
|
HD Pressure Transducers are Industrial quality low cost sensors designed with hydraulics in mind.
Utilising the very latest thin film technology the units are designed for ten million cycle peak to peak performance.
Standard accuracy is ±0.5% (of full scale), a stable transducer with extremely low calibration drift (0.2% per year). All stainless steel construction.
NAMAS Calibration certificate available.
Connection is via 1/4" BSP male thread with viton elastomer face seal as standard.
|
|
| |
4 - 20 mA |
0 - 10 VDC |
| Pressure range |
Part number |
Part Number |
| 0 - 60 |
3403-21-A4.37
|
3403-21-A4.39 |
| 0 - 200 |
3403-10-A4.37
|
3403-10-A4.39 |
| 0 - 400 |
3403-15-A4.37
|
3403-15-A4.39 |
| 0 - 600 |
3403-18-A4.37
|
3403-18-A4.39 |
|
|
|
|
|
|
|
Multi System 5050-hand held test & data loggin
|
|
Multi System 5050 - The latest advances in hand held test & data logging - now available
The Multi System 5050 is the most advanced hand held test and data acquisition instrument on the hydraulics market. Purpose built for the hydraulics industry and loaded with features specifically designed to capture key events. Print directly in full colour with full zoom on A4, or transfer to HydroComsys software for further analysis. HydroWin Software
Link 2 units together to capture 12 channels simultaneously
|
(*click picture to enlarge) |
ISDS Transducer recognition:- automatically programmes the 5050 with calibration details
4 analogue inputs defined by user as any combination of pressure, temperature, volts, current etc.
2 x frequency inputs for Flows or RPM
50 memory locations
500,000 reading memory
1ms up to 99 minutes scanning rate (fully adjustable)
Comprehensive memory trigger functions (Start) for pin-pointing problems
Pre-trigger logging
Direct A4 printing to any IBM / Epson / HP office printer in colour if available
RS232 and USB for data download to PC and evaluation by powerful HydroWin Software |
|
|
|
|
|
|
|
|
The Microbore Hose Assembly, most commonly used to connect to a MINIMESS® Test Point for pressure testing, has many other diverse applications. The hose is available in 2mm and 4mm internal diameter. The Microbore Hose Assembly is extremely flexible, light weight and is specified for a large range of uses:
Select end fitting list to view some of the available ends crimped from stock
|
|
Test points
OILS
WATER
GASSES
AGGRESSIVE MEDIUMS
Pressure Testing up to 630 Bar
Bleeding / Sampling
Permanent installations
Pipe up as electrical cabling
Brake testing / permanent installations
Any length of hose can be supplied with any combination of end adaptors from stock |
|
|
|
|
|
|
|
|
Test Kits made from a selection of items from the MINIMESS® 1620 series. Hydrotechnik makes standard BSP test Kits with 1/4" 3/8" and 1/2"SNA adaptors, 2 gauges, Microbore etc (shown right).
Alternatively, you can order a test kit to suit your application.
OEM enquiries are welcome for volume applications, eg. Service Engineers or as a recommended spare to purchase with a piece of equipment.
|
(*click picture to enlarge)
|
The test kit (right) can be ordered by quoting the part number below but substituting one or both of the Xs with the code letters listed for gauges of specific ranges: 3101-16-38.50 for kit with 40 / 400 bargauges (standard)
Ohter Test kit available:
LOW COST TEST KIT
UNIVERSAL TEST KIT
OIL SAMPLE KIT
JCB TEST KIT
CATERPILLAR TEST KIT |
|
|
|
|
|
See other products:| Bell | Broady | Bronswerk | Carltsoe | Eesiflo | Fluidwell | PCM | Ramco | Rivertrace | Sealite | Welker |
|
